The use of tablet PCs is particularly recommended for mobile applications when it is necessary to read data, receive instructions, visualize or operate and set up devices. With the ND62, ICP Deutshcland has a tablet PC that is designed for a wide range of mobile applications. The ND62 is IP65 protected, has a size of 283x192x15 mm (WHT), is certified according to MIL standard 810G and withstands a drop from a height of 1.5 meters. The ND62 is equipped with an Intel® Celeron® N4120 processor, which features four processor cores with a base clock of 1.1GHz and a turbo clock of 2.6GHz. 4GB of DDR4 RAM is pre-installed and can be expanded to 8GB if desired. The 10.1" inch display in 16:10 format delivers a resolution of 1920x1200 and is suitable for use in direct sunlight with 800 cm/m².
Designed for applications such as mobile applications, service PC, measurement and testing, operation, visualization, remote access PC, picking PC
The 10 point multi touch supports two finger operation with gloves as well as operation with wet fingers. Also available are a front-facing 2MP camera, a rear-facing 8MP camera, a USB3.1 Type A, a USB 3.1 Type C, an RJ45 GbE port, a removable DC connector plug, a Micro HDMI, a 3.5mm audio port, a Nano SIM, and an SDXC card reader. The 7.6V battery is hot swappable, delivering 4200 mAh and up to 10 hours of runtime. The 7.4V backup battery provides 142mAh and is used for buffering when changing the main battery. In addition, the ND62 is equipped with WI-FI6 (802.11 ax), Bluetooth 5.2, a 9-axis MEMS sensor, an ambient light sensor, a proximity sensor, and a GPS/Galileo module. Optionally, a 1D/2D barcode scanner and an LTE module can be installed. Additional accessories such as docking stations for in-vehicle or tabletop use, digitizers, battery chargers or carrying straps are also available to round out the product. Upon request, ICP Deutschland can supply the ND62 in the desired configuration and with a pre-installed operating system as a ready-to-use system.
