Split Cable Entry Frames

Featuring an overall frame size of 202x102 mm KEL 183 series icotek cable entry system from M Buttkereit comes with a split black Polyamide frame assembly for ease of both initial cable assemblies as well as simple accommodation of additional cabling and general retro fitting. The frame may be equipped with grey elastomer inserts to provide IP54 cable sealing. It can accommodate cables and tubes up to 75 mm diameter in a variety of cable sizes and grouping configurations. Standard frame plus insert assemblies can be provided to cover maximum size cable arrangements of 2 cables up to 75 mm diameter, or one cable of 75 mm and four of 34mm diameter, and a third arrangement of eight cables of 34 mm diameter. In all cases, cables of lesser diameters can be accommodated, together with cables incorporating pre-assembled terminations. The inserts can be supplied pre-formed for clamping and sealing cable O/D sizes of 34-44, 44-54 or 54-64 mm respectively. A pre-formed insert is also available for cable sizes 64-75 mm diameter, together with a blind insert which can be incorporated to accommodate future cabling requirements. This can be cut as required (cable diameter minus 10mm to achieve IP54 sealing) to act as a mixed, multiple diameter insert for varied individual cables up to 55mm in size. Both the Polyamide frames and elastomer inserts are halogen and silicone free and achieve flame class UL-94 V0 with self-extinguishing qualities. The temperature ratings are -40 to 140 °C for the frames and -30 to +90 °C for the elastomer inserts.