P-KUBE Krome from Pizzato has high anti-bypass coding level and signalling visibility, and it helps to optimize cost of components
With RFID technology
Suitable for medium/light applications
Free of charge development and programming software as download
With solenoid and RFID technology
With an activation distance of 20 mm
With both fixed and flashing light
With a specific LED for the status
This innovative version allows to close a single contact in each of the four positions, facilitating the device handling
With higher versatility
Pizzato Elettrica presents the new NS series safety switches with solenoid and RFID technology. The new NS series combines all the knowledge and innovations developed by Pizzato Elettrica for more than thirty years of experience in industrial safety
Suitable for medium/light applications. Simplified, versatile and adaptable fixing system. Maximum safety PL e and SIL 3 with a single device. Articulated actuator for inaccurately closing doors. Technopolymer body, holding force up to 2100 N.
Contactless activation by means of the RFID technology. Suitable for medium/light applications. Simplified, versatile and adaptable fixing system. Maximum safety PL e and SIL 3 with a single device. Technopolymer body, holding force up to 2100 N.
The NS series by Pizzato offers Ccntactless activation by means of the RFID technology. It is suitable for medium and light applications. The simplified, versatile and adaptable fixing system allows easy installation. The maximum certification is safety PL e and SIL 3 with a single device. The technopolymer body has a holding force up to 2100 N.
The NS series switches from Pizzato make it possible to obtain circuits with the highest safety level PLe and SIL3, installing only one device on the protection
NG series: Actuation without contact, using RFID technology. Buttons for control and signalling functions built into the switch. Maximum holding force of the actuator 9750 N. Wiring of the buttons inside the switch. Maximum safety level SIL3/PLe with one device on the guard only.
NG Series Safety Switches with contactless activation by means of RFID technology. Maximum holding force of the actuator 9750 N, maximum safety level SIL3/PLe with one device on the guard only.
NG series switches create circuits with maximum safety level PLe and SIL3, even though a single device is installed on the protection. Moreover, they can be connected in series up to a maximum number of 32 devices
This new and innovative series brings safety to a new level. These switches are used on machines where the hazardous conditions remain for a while, even after the machines have been switched off
The Customer has the opportunity to choose between two different activation modes of the safety outputs: active with guard closed and locked for machines with inertia, or active with guard closed and unlocked for machines without inertia
Pizzato's NG Series FID safety switches with block are used on machines where the hazardous conditions remain for a while, even after the machines have been switched off
For checking the contactors or forced-guide relays
Pizzato's NG series offers maximum actuator holding force of 7500N, activation without contact using RFID technology, maximum SIL3 and PLe safety level with just one device on the protection, optional connection in series of several switches
For piloting four independent contact blocks
In stainless steel
Can be fit to a wall
Digital Edition Download PDF